New Innovative Tool Holders Coming From Iscar Direct The Way In Machining Effectiveness

Sponsored Links

Iscar's Heliturn system features a unique, double-sided insert with 4 cutting edges for Fast Metal Removal (FMR) turning. The brand new Heliturn is a tangentially clamped insert with a distinctive helical shaped cutting edge, useful for considerable depths of cut and greater than typical feed rate. The LNMX...-HT Heliturn insert is screw-clamped into the SLANR tool holder and reinforced by the TLN ..-HT carbide seat. This seat has ground surfaces on the top and bottom, to ensure perfect contact of the insert with the tool holders. The upper rake face of this insert is mounted level with the top of the tool holder to enable chips to flow across the insert, without being afflicted by clamps or the tool holder body. The 4 curved helical cutting edges assure positive radial rake angles and soft penetration into the material being cut. The lessened forces and smaller loads establish better tool longevity, elevated stability and the ability to use very massive depths of cut and higher feeds. The chipformer, deforms and breaks the chip into rib type curved segments which can conveniently be removed from the cutting area. This insert has a frontal clearance angle of 3.7 with a 6 side clearance angle to permit machining to a 90 shoulder. Depth of cut up to .315" and facing depths to .126" at up to .047" IPR are feasible with Heliturn.

When compared to CNMG/M 16... or WNMG/M 13... insert sizes with the similar corner radius, much better tool life can be envisioned when using the LNMX 1506..-HT insert. Iscar has recently added a smaller size to the Heliturn family - the LNMX 1104..R/L-HT insert and tool holder for the common application range of up to .197" depth of cut. The completely new insert features all of the blessings of the larger insert. This heightens the economical advantage in the medium machining application area. When compared to CNMG/M 43. 12... or WNMG/M 43. 08... insert sizes with the same corner radius, a much better tool life can be expected. The inserts are available in .031, .047 and .063" tool nose radii. Heliturn inserts are presented in the most excellent carbide grades: IC9025, IC3028 , IC428, IC907, and IC908.

The external tool holders are obtainable in 1, 1.25 and 1.5" shank sizes. Boring bars are offered in 1, 1.25 1.5 and 2" bar sizes. Also offered are exchangeable heads. These tool holders have Iscar's unique Hard Touch coating, which extends holder life and hinders corrosion. As a result of the positioning of this insert, machining next to the tailstock is permissible.

The high positive rake angle of these tools allows 10-15% less power usage than standard tool holders at the same parameters.

By utilizing Iscar's Heliturn tools, tremendous cost savings and profitability in lathe procedures is guaranteed.

A Brand new 80 Degree Rhombic Insert with high helical cutting edge for high metal removal rates Iscar is introducing the CNMX 1207..-HTW insert family. The brand new insert has a very positive radial, helical cutting edge and a positive rake angle; a incorporation which considerably decreases the cutting forces. The insert's corner has a wiper arrangement which supplies high surface finish even at high feed conditions, which in abundant occasions can eliminate a finishing cut. The corner angle is 88 degrees which provides elevated strength. The CNMX inserts were designed for heavy machining applications. Their distinctive design ensures reliable, fast metal removal when using 80 degree rhombic inserts. They can be mounted on any regular tool holder that carries conventional CNMG inserts, but the seat has to be substituted with a special seat: TCH 4. Iscar's R-clamp tool holders are highly favored for heavy machining applications.

Saving You Hardware Problems And Some Money: Buying The Perfect Cordless Drilling Machine
Whether you're an avid craftsman or an amateur just looking to fix things around the house, to buy a cordless drill can be a daunting task.

Methods For Working With As Well As Keeping Up A Concrete Chain Saw
Do you happen to do a lot of cutting of reinforced concrete and other tough materials? You may need a concrete chain saw to make your job easier.

A New Wood Chipper Makes It Faster And Easier To Clean Up Brush Inside Your Yard
A wood chipper can be a great tool to help clean up your yard and for making chips for landscaping. Here are a few things you need to know about when picking one.

Megger Tester - The Standard Of The Industry
Every field of business has a company that not only helps set the standards for the industry, but leads it in a remarkable way. These companies are always innovative, and have established themselves as an expert that others look up to and strive to be like.

Benefit From The Features Of Digital Caliper.
Here are some of the top reasons for considering a digital caliper. Depending on the size of your requirement you can get a caliper for about $49-100. A battery is used to power the device. It lasts and so you do not have to worry about replacing the battery.

Wood Working Made Easier With Grizzly Tools
Woodworking is a craft that requires adequate skill and creativity. The skill of a woodworker is translated to the wood with the use of appropriate wood carving tools. One brand that is popular among Northern Tools customers is Grizzly Woodworking tools.

Various Kreg Jig Projects You Can Do
One of the leading brands when it comes to efficient and convenient tools is the Kreg Jig. In the products of Kreg Jig, the most widely used are the pocket hole jig and the kreg joint. The pocket hole is so easy to use that some described it as dummy proof.