Revolutionary End Mills By Iscar Can Amplify Productivity While Cutting Down Costs

Sponsored Links

Producers and die & mold shops can exclude chatter problems in many milling operations with Iscar's unique Chatterfree carbide end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the prime source of chatter. This allows faster cutting and greater finish in rough or finish slotting, shoulder milling and cavity milling. In addition, users also report prolonged edge life due to reduced chatter. The chatter-free feature is realizable in both solid carbide endmills and tips in Iscar's Multi-Master replaceable-tip family. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for Multi-Master tips. These brand new endmills are perfect for reduced power machines with ISO40 or BT40 adaptations. The solid carbide adaptation can handle full slot machining up to 2xD. Depth capacity on the replaceable-tip version is more constrained since the active length is shorter. In full slotting applications on alloy steel, the solid carbide construction readily handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

Finishred - Brand New Solid Carbide Endmills

Iscar is introducing the EFR.. B44 and the MM EFS.. Finishred a innovative solid carbide end mills family. The Finishred carbide endmill is a blending of both roughing and finishing endmills in a single tool. Roughing endmills remove metal from work pieces more quickly and adequately than conventional endmills. However, roughing endmills leave grooves on the machined surface. In consequence, after using a roughing endmill, a finishing endmill must to be used in order to attain a flush surface finish. This involves time-consuming tool change, setup time and inevitably of maintaining two endmill types in the inventory.

Qualities of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, two serrated flutes and two continuous flutes.

The cutting edges of the finishing flutes are radially further from the tool axis than the cutting edges of the serrated flutes. The finishing flutes phase out the grooves caused by the roughing flutes, leaving a constant surface finish.

The tool is fully functional and facilitates running at rough machining parameters, resulting in finish surface quality.

The distinctive tool design subdues vibration at high load applications.

The tool creates short and long chips simultaneously. This chip mixture is evacuated more promptly than each individual chip type, an extraordinary solution in slotting and cavity milling applications.

The Finishred is also presented with the Multi-Master indexable milling head selection which incorporates the Finishred includes with the usefulness of little setup time, no regrinding costs and the wide range of shank and extension choices are offered for the Multi-Master milling heads.

A single tool replaces the roughing and finishing endmills; therefore lowering inventory.

Tool change and setup time can be waived.

An extra tool position is accomplished on the machine

New Chip Splitting Solid Carbide Endmills for Increased Metal Removal Rates

ISCAR is releasing the ECP-3/4L family of chip splitting endmills. The innovative endmills are obtainable with 3 and four 38 degree flutes in grade IC900. They have 2xD and long shanks with decreased neck diameter, which help machining along high shoulders, at high feeds. These endmills, due to their chip splitting feature and force distribution can be used very effectually on reduced power machines (CAT40/BT40/ISO40). The serrated cutting edge incorperates flat peaks which leave a greater surface finish, in association to the current rougher carbide endmills. The ECP endmills are favored for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be implemented on alloyed steel as well. All of the preliminary tests conducted at numerous customers' locations showed extraordinary results.

The Latest In Carbide Endmill Designs In A Extended And Prospering Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Iscar Recently Made Public Many Original Lines To Continue Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Various Improvements Have Expanded Iscar's Line Of Indexable Endmills For Elevated Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

A Few Of The Many Advancements In Carbide Inserts From Iscar Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Iscar Adds Their Latest Creations To A Extensive Line Of Outstanding Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Commercial Water Heater- Which Is Best For Your Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.

Graduate Careers- Get A Job In LandRover
It is pretty clear that people who work within the car industry will be having the same monetary problems as everyone else in the world due to the economic downfall.